The Learn button on your garage door opener is located above the antenna wire that hangs from the motor head, or it may also be under a light cover. The Learn button will be either green, red/orange, purple or yellow.
The Learn button has two functions: One is to program accessories to the opener; the other is the clear the memory of the opener. Clearing the memory on a unit will erase all of the accessories that are programmed to the opener.
If your system has a green, red/orange or purple Learn button
To program the remote:
- Press and release the Learn button, the light will come on steady for 30 seconds.
To clear the memory:
- Press and hold the Learn button. The LED will turn on. After 6 seconds the LED will turn off which will clear out the handheld remote controls and keyless entry.
If your system has a yellow Learn button:
To program the remote:
- Press and release the Learn button. The light will come on steady up to 2 minutes.
To clear the memory: This action must be completed two times to remove MyQ accessories and door controls.
- Press and hold the Learn button. The LED will turn on. After 6 seconds the LED will turn off which will clear out only the handheld remote controls and keyless entry.
- Within 3 seconds of the LED turning off, press and hold the learn button for 6 seconds. When the LED turns off a 2nd time, the MyQ accessories and door controls will be removed from the garage door opener.
- Reprogram devices if necessary.